中文版
ENGLISHPRODUCT CATEGORIES
Load Cells
Weigh Modules
Scale indicator & contr…
Scales
Auxiliary product
Production description:
Weigh module of M-DB916A-1A is with perfect level of performance in tank and hopper weighing applications. M-DB916A-1A series kit is ideally suited for indoor and outdoor process weighing system in the medium to high capacity ranges. Each module incorporates self-checking capability for thermal expansion and contraction. Also welds between parts are very smooth and strong
Main Features:
• Double-ended shear beam design, center loaded
• Self-reset, smart design facilitate module to be bolted directly to tank leg without requiring additional mounting plates or load buttons
• Capacity: 2.5klb-75klb
• Alloy steel and stainless steel optional.
• Assembled with double-ended shear beam DB916A
M-DB916A-1A Weighing Module Specifications
| Parameter | Units | Specification | |||
| Model No. | M-DB916A-1A | ||||
| Load Cell | DB916A | ||||
| Rated capacity (Emax) | Ibs | 2.5K; 5K; 10K; 20K; 35K; 50K; 75K | |||
| Rated output | mV/V | 3.0 ± 0.1% | |||
| Combined error 1)2) | % of Emax | ＜ ± 0.03 | |||
| Repeatability error | % of AL 3) | ＜ ± 0.02 | |||
| Creep; 30 minute | % of AL | ＜ ± 0.02 | |||
| Min. dead load output return (DR); 30 min | % of AL | ＜ ± 0.02 | |||
| Temp. effect on | Min. dead load output | % of Emax/℃ | ＜ ± 0.002 | ||
| Rated output 2) | % of AL/℃ | ＜ ± 0.002 | |||
| Temperature range | Compensated | ℃(°F) | -10 to +40 [+14 to +104] | ||
| Operating | -30 to +65 [-22 to +149] | ||||
| Safe storage | -40 to +80 [-40 to +176] | ||||
| Excitation voltage | Recommended | V AC/DC | 5 ~ 15 | ||
| Maximum | 20 | ||||
| Terminal resistance | Excitation | Ω | 760 ± 10 | ||
| Output | 700 ± 3 | ||||
| Insulation resistance @50VDC | MΩ | ＞5000 | |||
| Breakdown voltage | V AC | ＞500 | |||
| Seal type / IP rating | Hermetically welded / IP68 | ||||
| Load limit | Safe | % of Emax | 150 | ||
| Ultimate | 200 | ||||
| Cable length | ft | 2.5K-5K | 10K-35K | 50K-75K | |
| 20.0 | 40.0 | 52.5 | |||
| Notes: | |||||
| 1) Error due to the combined effect of non-linearity and hysteresis | |||||
| 2) The sum of errors due to Temperature Effect on Output comply with the requirements of OIML R60 and NIST HB44 | |||||
| 3) AL = Applied Load | |||||
