Weigh Modules for Compression
M-R510S-1S Weigh Module:
Production description:
Weigh module of M-R510S-1S is designed for dynamic weighing system, such as mixed hopper, silo, vessel and tank weighing systems. Capacity is from 2.5t to 20t. The MR510-1S Series kit is ideally suited for installation in limit space
Main Features:
• Low-profile.
• Upper plate with blind hole to be loaded.
• Adjustable height screw against overload and overturn.
• Capacity: 2.5t-20t
• Material: stainless steel
• Assembled with compression load cell R510S.
- SPECIFICATIONS
- DRAWING
- DATA SHEET
- APPROVALS
Parameter | Units | Specification |
Model No. |
| M-R510S-1S |
Load Cell |
| R510S |
Rated capacity (Emax) | t | 2.5t; 5t; 10t; 15t; 20t |
Rated output | mV/V | 2.0 ± 0.1% |
Combined error 1)2) | % of Emax | < ± 0.05 |
Repeatability error | % of AL 3) | < ± 0.02 |
Creep; 30 minute | % of AL | < ± 0.03 |
Min. dead load output return (DR); 30 min | % of AL | < ± 0.03 |
Temp. effect on | Min. dead load output | % of Emax/℃ | < ± 0.002 |
Rated output 2) | % of AL/℃ | < ± 0.002 |
Temperature range | Compensated | ℃(°F) | -10 to +40 [+14 to +104] |
Operating | -30 to +65 [-22 to +149] |
Safe storage | -40 to +80 [-40 to +176] |
Excitation voltage | Recommended | V AC/DC | 5 ~ 15 |
Maximum | 20 |
Terminal resistance | Excitation | Ω | 760 ± 10 |
Output | 700 ± 3 |
Insulation resistance @50VDC | MΩ | >5000 |
Breakdown voltage | V AC | >500 |
Seal type / IP rating |
| Hermetically welded / IP68 |
Load limit | Safe | % of Emax | 150 |
Ultimate | 300 |
Cable length | m | 6.0 |
Notes: |
1) Error due to the combined effect of non-linearity and hysteresis |
2) The sum of errors due to Temperature Effect on Output comply with the requirements of OIML R60 and NIST HB44 |
3) AL = Applied Load |