中文版
ENGLISHPRODUCT CATEGORIES
Load Cells
Weigh Modules
Scale indicator & contr…
Scales
Auxiliary product
Product description:
The P510SD series is a typical digital cost-efficient canister compression load cell with compact and robust machined canister. The P510SD is fully hermetically sealed with upper and base convers; which enable it to work in the harshest conditions. A rocker column design ensures optimum weighing accuracy when subjected to off-center and side forces when the scale deck is moving back and forth, meanwhile left and right.
Main Features:
• Material: Stainless steel
• Compensation mode: active compensation for non-linearity, creep, hysteresis, ZTC, STC, etc.
• Advanced quick Protocol CANopen by 125 kbit/sec
• Rated Capacities: 30t~50t
• OIML R60, NTEP HB44, CPA, CE and RoHS certified
• IP Rating: IP68, IP69K
• Suitable for truck scales, heavy duty hopper scales, force measurement equipment.
• High precision by OIML R60 C6, high reliability
| Parameter | Units | Specification | |||
| Model No. | P510SD | ||||
| Load cell type | Column compression (Digital) | ||||
| Rated capacity (R.C.)4) | t | 30 | 40 | 50 | |
| Sensitivity at R.C. | d @ R.C. | 300,000 | 400,000 | 500,000 | |
| Communication | Controller Area Network (CAN), Encrypted | ||||
| Communication rate | kbit/sec | 125 | |||
| Accuracy class | C3 C4 C6 | ||||
| Min. dead load | kg | 50 | |||
| Zero balance | % of Emax | ± 1 | |||
| Y-value | 10000 12500 20000 | ||||
| Repeatability error | % of AL 3) | ＜ ± 0.010 ＜ ± 0.008 ＜ ± 0.005 | |||
| Creep; 30 minute | % of AL | ＜ ± 0.0167 ＜ ± 0.0125 ＜ ± 0.0083 | |||
| Min. dead load output return (DR); 30 min | % of AL | ＜ ± 0.0167 ＜ ± 0.0125 ＜ ± 0.0083 | |||
| Temp. effect on | Min. dead load output | % of Emax/℃ | ＜ ± 0.0016 ＜ ± 0.00128 ＜ ± 0.0008 | ||
| Rated output 1)2) | % of AL/℃ | ＜ ± 0.00133 ＜ ± 0.0010 ＜ ± 0.00066 | |||
| Temperature range | Compensated | ℃(°F) | -10 to +40 [+14 to +104] | ||
| Operating | -40 to +65 [-40 to +149] | ||||
| Safe storage | -40 to +80 [-40 to +176] | ||||
| Excitation voltage | Recommended | V AC/DC | 12 or 24 | ||
| Minimum / Maximum | 7.5 / 28 | ||||
| Lightning protection | A | ＞15,000 | |||
| Surge protective device | Integral | ||||
| Insulation resistance @50VDC | MΩ | ＞5000 | |||
| Breakdown voltage | V AC | ＞500 | |||
| Protection | Type | Hermetically welded | |||
| IP rating | IP68/69K | ||||
| Load limit | Safe dynamic load | % of Emax | 70 | ||
| Safe | 200 | ||||
| Ultimate | 300 | ||||
| Material | Spring element | Stainless steel | |||
| Enclosure | 304 stainless steel, laser welded | ||||
| Connectors | Integral | ||||
| Strain gauge | PEEK-1000 | ||||
| Cable construction | Option 1 | Fireretardant PVC jacket, 6mm O.D. ; 4 Conductors dual shielded wires | |||
| Option 2 | Exterior braided armor covered with fireretardant PVC; PVC chemically resistant jacket, 7mm O.D. ; 4 Conductors triple shielded wires | ||||
| Cable | Cable length | m | 16.0 | ||
| Network | Junction boxes | ||||
| Weight; approx | kg | 6.0 | |||
| Fatigue life | cycles @Emax | ＞1,000,000 | |||
| Deflection at Emax; approx | mm | ＜0.5 | ＜0.6 | ＜0.7 | |
| Barometric pressure effect on Zero Output | Vmin/kPa | ＜1.0 | |||
| Notes: | |||||
| 1) Error due to the combined effect of non-linearity and hysteresis | |||||
| 2) The sum of errors due to Temperature Effect on Output comply with the requirements of OIML R60 and NIST HB44 | |||||
| 3) AL = Applied Load | |||||
| 4) R.C. = Rated Capacity | |||||
